Philips TV Remote is designed for use on the 2k11 Philips NET TV models. The main purpose is to replace the standard remote controls.
Please READ carefully configuration steps listed below!
This is a light-weighted Application, with a very easy to use interface. It allows to control the following functions:
- Volume Up/Down (use the scroll wheel or phone volume keys)
- Navigation cursors
- Media Player control
- Ambilight control (use scroll wheel to change color), also with automatic color changing control.
- Internet mode with full landscape and user friendly keyboard.
- Channel Change(used scroll wheel)
- and much more...
Note that for keyboard mode to function properly, you have to set TV menu language to English. In case your TV languages settings are different than English, you may purchase a 2k11 Key Mapping plug-in available for other menu languages.
This plug-in is available at:
This App controls the TV via jointSpace http commands.
An initial tv setup is required for all commands to work accordingly:
If you are not sure if your tv is a 2k11 model, please check the following link:
If your TV is not listed in above mentioned list, App will not work.
If you have a 2k10 model, note that not all commands are supported!
TV's produced before 2009 can NOT use this App!
The TV needs to be activated to accept Remote Applications (one time operation)
For that you need to enter the following keys sequence from the TV remote control, for e.g. while watching TV:
5646877223 (="jointspace" using multitap digit entry)
Make sure this is activated, otherwise your app won't be able to communicate with your TV!
Change/Get the IP setting of your TV. It is recommended to use a static IP address.
To check or set TV IP address, follow the sequence: Press HOME button >> Setup >> Network Settings >> IP Configuration >> IP Address.
Note down the IP number for further settings in you App.
Enable Wifi on your phone and Start your App. You will be prompt to input your TV IP address (one time operation). Your app is ready to use!
|دسترسی به اطلاعات مربوط به شبکه های Wi-Fi را می دهد.|
|تغییر موقعیت اتصال به وای فای|
|دسترسی به اطلاعات مربوط به شبکه ها را می دهد.|
|باز کردن سوکت های شبکه|