Have phone and tablet or second phone and want to reach where eyes can't reach, or want to look on your sleeping baby from other room, take picture without revealing this, this app is just for you.
Communication takes place directly between two devices equipped with this software, communication doesn't result in any charges, but distance is limited.
Systems equipped with Java software can control camera on mobile device using Remote Camera Java app, http://programy.jastrzab.com/remote_camera/
How to use it ?
1. instal app on both devices
2. on first device turn on Server
3. on second device, find device with name or address that matches to first device name or address and tap on it to establish connection
4. if connected, you can make pictures or just see what first device is seeing but on second device
Remember about !
● To communicate using Bluetooth mode, device must be equipped with Bluetooth
● To communicate using Wifi mode, device must be equipped with WIFI
● Pictures are always saved on server device
● Device acting as server can consume large amount of power so without access to power source working time may be limited
● Electromagnetic interference, obstacles and distance can cause communication problems even connection break
● Preview smoothness depends on device and connection performance
● Devices must be within the communication range or in the same network for WIFI connection
● Bluetooth adapter must be enabled and devices must be paired for Bluetooth connection
● On devices with android older than 3.0, device acting as server can only transmit preview, cannot take pictures
● To activate autofocus press shutter longer and release to take picture, short press will take picture immediately without autofocus
● To unpin floating preview window, double-tap
Have problem ?
● If server device is not on the clients list you probably will need to pair devices for Bluetooth connection or be within the same network for Wifi connection
● If for some reason in WIfi mode, server isn't visible on clients list, need to enter address manually by clicking on Connect item
● If preview is stopped try to reconnect, if connection will be unsuccessful then restart server
How Wifi discovering works ?
● Discovering is active only if user is present, this means when app is visible, screen is on and device is unlocked and if active connection mode is WIFI
● Only if app is acting as server will broadcast address
● If server is disabled app is listening for incoming broadcast from other device but without broadcasting
● Discovering mode works only for devices in the same network segment in other words in the same subnet
|از ملزومات دسترسی به دوربین دستگاه|
|استفاده از مدیریت انرژی و WakeLocks جهت بیدار نگه داشتن پردازشگر و جلوگیری از کم نور شدن صفحه نمایشگر|
|نوشتن اطلاعات در درایوهای سیار|
|کاوش و جفت کردن دستگاه های بلوتوث|
|به برنامه ها اجازه اتصال به دستگاه های جفت شده بلوتوث را می دهد.|
|باز کردن سوکت های شبکه|
|دسترسی به اطلاعات مربوط به شبکه های Wi-Fi را می دهد.|
|دسترسی به اطلاعات مربوط به شبکه ها را می دهد.|
|باز کردن پنجره با استفاده از TYPE_SYSTEM_ALERT که در بالای تمامی دیگر برنامه ها نشان داده میشود|
|دسترسی به لرزاننده|
|خواندن اطلاعات موجود در درایوهای سیار|